Features:
- Master Chip: IP2312
- Input voltage: 4.5 ~ 5.5V
- Charging cut-off voltage: 4.4V
- Light indicator: Red indicates charging status, Blue indicates charging completed
- Note: This product does not have a battery capacity indicator function, and there is no battery protection function
- Conversion efficiency: 93% at 3A, 94% at 2A, 95% at 1A, etc…
- Charging mode: CC (constant current), CV (constant voltage)
- Charging current below 3V: 100mA, Trickle Charge
Charging current: 3A (the current can be changed by adjusting the resistance)
It can charge up to 3A and this charging current can be adjusted by changing the value of the resistor in the picture below as follows:
– Factory setting: 3A
– Without resistor: 2A
– With 135k resistor: 1A
The noteworthy feature of this module is the fact that when it detects the voltage of 4.2V in the battery with a charging current of less than 300mA, after the CV phase (Constant Voltage), it stops charging every 4 minutes to check if the voltage battery is low. If this is over 4.15V, charging is stopped. If it drops below 4.15V, the charging process is resumed to check again after 4 minutes. If the battery is fully charged, recharging will resume when the voltage in the battery drops below 4.1V.
- Stock: In Stock
- Model: Lithium Battery Charger Module IP23
- Weight: 0.00كلغ
